How to install artificial culture stone?

Firstly: Prepare the wall—-Clean up the wall to be without dust or bump, and make the surface to be rough enough for the next steps(Those low water absorption smooth walls such as plastic or wooden surface need iron gauze and be made to roughness);

Secondly: Prepare for the lay-up work—-

1. Put the artificial stone on the floor to see how you want to assemble them on the wall, and then lay them up in order.(Since artificial stone is random assembled, you can design it as you like, but note that the stones with same size/color/shape are not suggested to be assembled together);

2. Make the stone wet enough, and then add enough adhesive on the back of stone for attaching to the wall. And pls send for experienced worker for this job, the thickness of adhesive on the back is suggested to be 10~15mm, and for art tiles it could be thinner.

Thirdly: Lay up—–Lay up the corner stones first, and be sure to press the stone on the wall hard enough for a strong attachment, also some adhesive should be seen to extrude when you press hard.

Fourth: Space—-The surface and side of artificial stone should be cleaned enough to be added on joint mixture, it’s also important to lay up the joint mixture well, so pls send for experienced craftsman for this job. The suggested space for art tiles is 10mm. For those random stone is 15mm.

Fifth: Maintenance—-For those stones used outdoor, the repellent should be used after one week when the stones and joint mixture are dry enough.